LCGB Forums

The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com

RT Carbs

Want to know which carb to choose? Having problems setting up the jetting details on your scooter? Wheter you are using a standard or tuned carb, ask your question here.

RT Carbs

Postby rossclark » Sat Feb 09, 2019 1:08 am

What carbs are you using on your RT225?

I've just got one, inc. the flange manifold, which will be going on my Lince.

The gearing will probably stay 4.8 SX, I have a no name clubman and a JL3 curly as exhaust choices.

I'd also prefer to run a filter.

Looking for solid recommendations for carb ideas - I have a TM30 and a couple of OKO/ Koso PWKs (24 & 30), these are a bit unknown to me but would be prepared to listen to something other than PHBH / PHBL set ups.

Not looking for a screamer just a steady, reliable set up.

Cheers.
User avatar
rossclark
 
Posts: 2432
Joined: Fri May 30, 2014 11:23 pm
Location: Lanarkshire

Re: RT Carbs

Postby ULC Soulagent » Sat Feb 09, 2019 2:56 pm

I’ve got the rt 230 reedvalve ttt on my scoot
Bgm V3 clubman
SX gearing
Delly phbl 25 with casa power filter
Runs sweet cruising 60/65 and tops out 75 returning 130 miles on a 11lt tank
Only other carb I’ve used is the vhst 28 which has been a right pig too setup.
Sorry this doesn’t help ur decision making :roll:
User avatar
ULC Soulagent
 
Posts: 635
Joined: Sun Apr 03, 2016 3:26 pm
Location: Milton Keynes

Re: RT Carbs

Postby rossclark » Sat Feb 09, 2019 3:04 pm

Interesting to know that's what it can do on that gearing, and without going to the 30mm, cheers.
User avatar
rossclark
 
Posts: 2432
Joined: Fri May 30, 2014 11:23 pm
Location: Lanarkshire

Re: RT Carbs

Postby rossclark » Wed Feb 13, 2019 11:09 pm

Given there doesn't seem to be much in the way of alternative opinion I've gone with what appears to be the tried and trusted PHBH30
User avatar
rossclark
 
Posts: 2432
Joined: Fri May 30, 2014 11:23 pm
Location: Lanarkshire

Re: RT Carbs

Postby Scooterdude » Thu Feb 14, 2019 8:51 am

I went from a phbh 28 to a phbh 30 on my RT reed and saw a marked improvement right across the range.
Scooterdude
 
Posts: 481
Joined: Fri May 26, 2017 3:45 am


Return to Carburettors

Who is online

Users browsing this forum: No registered users and 0 guests

cron