Hi guy’s, I am undergoing my first restoration. I have converted to a 12 v ignition on my LI125, not sure where the earthing points are, I have also uprated the rear brake light to an led, which has a separate earth connector. Any advice will be appreciated.
Thanks Andy
LCGB Forums
The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com
12 v ignition conversion
2 posts
• Page 1 of 1
12 v ignition conversion
by andy13 » Tue Nov 10, 2020 9:14 am
- andy13
- Posts: 13
- Joined: Fri Jun 19, 2020 6:20 am
Re: 12 v ignition conversion
by coaster » Tue Nov 10, 2020 1:50 pm
Assuming you mean a 12 volt electronic conversion, there is a white wire coming from the stator which is your main earth and should be connected to the white connector in the CDI unit. If your LED rear light has an earth connector then it needs to be connected to the frame.
-
coaster - Posts: 2678
- Joined: Fri May 30, 2014 1:00 pm
- Location: Norfolk, Flying 8 Balls
2 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 8 guests