Technical help for Series one, two and three Lambrettas. Models include the Li, Li Special, TV, SX, GP, Serveta and API/SIL models
by lammydave » Sun Apr 19, 2015 7:31 am
A friend of mine has just rebuilt his series 2..
but he has oil constantly leaking through the breather
says he's used the correct oil in the correct quantity
what could be the cause, please?
-

lammydave
-
- Posts: 232
- Joined: Sat May 31, 2014 6:09 am
- Location: in the shed
by dickie » Sun Apr 19, 2015 8:31 am
Drive side oil seal leaking?
I think you test for this by blocking the exhaust once it's running. If the seal is ok the motor stalls. If it's knackered the motor keeps running.
Can someone wiser than me confirm or deny this please?
-
dickie
-
- Posts: 1843
- Joined: Thu Oct 02, 2014 12:32 pm
- Location: Tyne and Wear
by Wack » Sun Apr 19, 2015 9:34 am
Most likely the chain is flicking it up, I fitted a small pipe to mine but have found the stainless versions leak the most as they have a piece of sponge in them and no half moon plate.
Last edited by
Wack on Sun Apr 19, 2015 11:10 am, edited 1 time in total.
-
Wack
-
- Posts: 737
- Joined: Sat May 31, 2014 7:11 pm
by MK Monty » Sun Apr 19, 2015 10:06 am
+1^^^^^^^^
The new shiny
ones are a simple dome no internals so leak like a tap out of the hole
-

MK Monty
-
- Posts: 340
- Joined: Sun Jun 01, 2014 10:32 pm
- Location: Stockport
Return to Series 1, 2 & 3
Who is online
Users browsing this forum: Bing [Bot], jonno and 34 guests