Engine casing repair

[Lambo]

I've just finished completely stripping my engine to have the casing aqua blasted prior to a complete rebuild. Once I'd cleaned the numerous years worth of dirt away I noticed that there is a crack that goes through one of the transfer ports to the other side of the mag housing flange. Can anyone recommend the best place to send/take to have it repaired, I live in North Wales but if I need to send it by courier than that's fine. Sorry about the poor image, taken on my phone

https://www.flickr.com/photos/132271324 ... 196137646/

[Lambo]

https://www.flickr.com/photos/132271324 ... 196137646/

[Captain Pugwash]

https://www.flickr.com/photos/132271324@N06/17196137646/

Is this on a ported engine casing

[Lambo]

Hi, no the casing is not ported it's a standard Li s 125. here's a slightly better image of the damage, unfortunately my friend now has the casing as he's having it cleaned for me.

https://www.flickr.com/photos/132271324 ... 231258791/

[HxPaul]

If the crack goes all the way through the casing then it needs repairing correctly.In your position I would get in touch with MB developments,they do weld repairs to engine cases.

[Lambo]

Thanks for the reply, I did consider contact MB. I'll email him and see what he says

[hullygully]

try chiggy too, he's repairing two off my casings @ present (SX200 & GP200) 07915394255

[Lambo]

Thanks for the advice, it's being sent to Mark Broadhurst to be repaired next week.