Technical help for Series one, two and three Lambrettas. Models include the Li, Li Special, TV, SX, GP, Serveta and API/SIL models
by Revvers » Thu May 12, 2016 3:27 pm
Hello. I've been looking at the cam lam chart as a basis to rejet my Mugello 186 set up. It lists jetting for phbh 26mm carbs and 30mm. I have a 28mm, is there a formula whereby I can work out where I need to be using the 26/30 settings??
-
Revvers
-
- Posts: 233
- Joined: Mon Jun 02, 2014 2:11 pm
- Location: Medway
by missing lynx » Thu May 12, 2016 10:27 pm
try the scooterotica site they have a section were people post actual set ups
-
missing lynx
-
- Posts: 882
- Joined: Wed Nov 26, 2014 5:14 pm
by CHRIS in MARGATE » Fri May 13, 2016 6:17 am
Bristol Lambretta Club site has a very good jetting section.
-

CHRIS in MARGATE
-
- Posts: 4080
- Joined: Fri May 30, 2014 5:49 pm
by MickYork » Fri May 13, 2016 9:52 am
Probably not a lot of difference between the 28 and 30. Set up as the 30 and worst scenario is you'll be too rich....better safe than sorry.
-
MickYork
-
- Posts: 1476
- Joined: Sun Jun 01, 2014 8:37 am
by Kev Fox » Sun May 15, 2016 7:34 pm
Myself and 2 buddies are running 186 Mugello's with 28mm PHBH Dellorto Carbs with 50 Pilot and 105 main.
-

Kev Fox
-
- Posts: 206
- Joined: Fri May 30, 2014 2:21 pm
- Location: Brinklow Warwickshire
Return to Series 1, 2 & 3
Who is online
Users browsing this forum: No registered users and 19 guests