horncast

[jimmna]

hi-have a horncast with all threads having bolts sheared off--is there any way out of this or do i just throw away --jimmna

[Warkton Tornado No.1]

A competent engineer will be able to remove those broken fasteners.

If that’s not you, we all tend to know an enthusiast that is capable of restoring the threads.

[EddieStone]

If you're going to throw it away, please throw it my way.

[Wack]

If there any threads proud try welding nuts to them, then heat the stem around the bolts and gently try to unscrew.

[tv175lambretta]

drill out slowly and carefully with a good quality left hand thread drill small bit (with a drill capable of running in reverse). Just takes time and effort.