Oversize lever pivots?

[Leotech]

Who makes or sells the over size brake and clutch lever pivot bolts, not seen them about for a while?

My clutch lever / shroud is very worn and I'm losing clutch pull because of it.

[rossclark]

Try MB or Torbay Lambretta who stocks their stuff

[HxPaul]

Most people with old scooters have to use oversized leaver pivots pins,especially on the clutch side.I got some from here and repaired mine.
http://www.ebay.co.uk/itm/LI-SX-GP-TV-S ... 46508837d2

[Leotech]

Most people with old scooters have to use oversized leaver pivots pins,especially on the clutch side.I got some from here and repaired mine.
http://www.ebay.co.uk/itm/LI-SX-GP-TV-S ... 46508837d2

They look pretty rough on the photo, doesn't say what diameter they are either?


I'll have a look at MB.

[rossclark]

MB are 8mm

http://www.torbaylambretta.co.uk/Lever_ ... 93951.aspx

[HxPaul]

MB are 8mm

http://www.torbaylambretta.co.uk/Lever_ ... 93951.aspx

P&P £4.50
By the way,the pins that I have are 8mm.

[rossclark]

I bought some small bits from Torbay a while back and they refunded the difference between what it actually cost and what the webshop said for the postage immediately.

[Leotech]

I think ill have to get some made with oversize heads and maybe 10mm shanks, its a series one and the holes are getting on for 10mm on the longest edge of the oval!

I lose about 10mm of cable pull on the clutch.