LCGB Forums
The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com
Exhaust bracket screw
6 posts
• Page 1 of 1
Exhaust bracket screw
by Geocamper » Tue Aug 05, 2014 11:16 pm
Running a 42mm clubman into 200gp gearbox. There's a hole on the underside of the gearbox which is for the exhaust bracket to be fixed to with a screw. Could someone tell me what size screw I need to fit the hole?
- Geocamper
- Posts: 145
- Joined: Sat May 31, 2014 3:36 pm
Re: Exhaust bracket screw
by CHRIS in MARGATE » Wed Aug 06, 2014 6:41 am
No thats the tailpipe fixing and thats 10mm and bolt underbeath is 13 mm. Off the top of my head.
-
CHRIS in MARGATE - Posts: 4080
- Joined: Fri May 30, 2014 5:49 pm
Re: Exhaust bracket screw
by Dimitrios_231 » Wed Aug 06, 2014 8:31 am
M8*1.25 pitch.
Both of you are correct, it is 8mm in diameter and the most common metric spanner sizes used for the head of the bolt, are 13mm and 14mm.
Both of you are correct, it is 8mm in diameter and the most common metric spanner sizes used for the head of the bolt, are 13mm and 14mm.
-
Dimitrios_231 - Posts: 981
- Joined: Fri May 30, 2014 1:15 pm
Re: Exhaust bracket screw
by mickyb » Wed Aug 06, 2014 8:32 am
Tail pipe fixing is 6mm, bracket underneath is 8mm. The bolt heads are 10mm and 13mm respectively
-
mickyb - Posts: 69
- Joined: Fri May 30, 2014 2:41 pm
6 posts
• Page 1 of 1
Who is online
Users browsing this forum: Google [Bot] and 26 guests