LCGB Forums

The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com

Rosso red 8073

Technical help for Series one, two and three Lambrettas. Models include the Li, Li Special, TV, SX, GP, Serveta and API/SIL models

Rosso red 8073

Postby Cortez the killer » Wed Oct 26, 2016 8:24 pm

Evening all, trying to find a rattle can that's as close a match to the GP rosso red 8073 colour as possible. Anybody point me in the right direction??
Cortez the killer
 
Posts: 10
Joined: Fri Sep 23, 2016 10:18 am

Re: Rosso red 8073

Postby Storkfoot » Wed Oct 26, 2016 8:33 pm

Phone these. They'll make it up and post to you:

Lechler Paint Suppliers

AMD Paints
Address: 4, Canal Bridge Centre
Ellesmere Port
CH65 4EH
United Kingdom
Tel: 0151 355 2229
Fax: 0151 355 2229
E-mail: info@amdpaints.co.uk
User avatar
Storkfoot
 
Posts: 2358
Joined: Fri May 30, 2014 8:59 pm
Location: Merseyside

Re: Rosso red 8073

Postby Adam_Winstone » Wed Oct 26, 2016 9:36 pm

Do not expect anyone to be able to supply you a match from the code or from any Lambretta dealer trying to match 8073 as it is not the correct colour and it cannot be recreated with today's pigments by using any of the old formulae. You will only get a correct colour match by taking your existing colour bodywork to a paint shop that has the ability to match your existing colour.

Adam

PS - That assumes that you are trying to match original colour bodywork. If you are trying to match bodywork that has already been sprayed 8073 (not the original colour) then you will still struggle to get a match by ordering over the phone as different sources will supply slightly different versions (close but not an exact match). You are still better off finding a paint/bodyshop that will match your existing and put it into a spray can for you.
Adam_Winstone
 
Posts: 1180
Joined: Tue Jun 03, 2014 1:52 pm

Re: Rosso red 8073

Postby Cortez the killer » Wed Oct 26, 2016 10:51 pm

Thanks chaps, checked AMD's website, they're selling cans at £14.51, so that's an option, bit expensive mind. Haven't any original red bodywork to get a match, will have to look out for some at the parts fair at warmwell.
Or...stop being a tight arse and get it sprayed properly :D
Cortez the killer
 
Posts: 10
Joined: Fri Sep 23, 2016 10:18 am

Re: Rosso red 8073

Postby xenia1 » Mon Oct 31, 2016 8:48 pm

Cortez the killer wrote:Thanks chaps, checked AMD's website, they're selling cans at £14.51, so that's an option, bit expensive mind. Haven't any original red bodywork to get a match, will have to look out for some at the parts fair at warmwell.
Or...stop being a tight arse and get it sprayed properly :D


Red is the worst colour for UV fade, the very best way to get a perfect match is to take a panel to a paint factors who have a photospectrometer, paint can be mixed to match exactly. If they dont have the facilities to put it in an aerosol take the quarter or half litre of paint to a motor factors who do Holts paint and have them do it for you. Holts mixed aerosols have a very good adjustable fan spray head which used properly gives a very good finish.
Ref 8073, as Adam says, its not a match to the original paint..
User avatar
xenia1
 
Posts: 1375
Joined: Mon Jun 02, 2014 7:53 pm
Location: Malaga Espana/ Norwich UK.


Return to Series 1, 2 & 3

Who is online

Users browsing this forum: No registered users and 18 guests