Series 3 / J Range

[Rich Oswald]

Has anybody ever put a series 3 engine into a J Range and if so has anyone got any pic's?

Cheers,

Rich'

[carlos fandango]

There was someone a few years ago , who put an s1/2/3 frame tube in a j range complete with engine. I know it sounds bonkers and I can't remember how it was done , but there were pics, I think it was someone from Norfolk , and may of been on the ....eherm..."other" forum

[carlos fandango]

Here you go rich

http://scooterotica.org/forum/viewtopic ... 2683#p2683

[Rich Oswald]

Cheers Russ that's just what I wanted and similar to what I have in mind. Do you know if this project was ever completed and the scooter put into use. I think engine wise something a little more subtle will suffice, lol.

Rich'

[byron]

]

http://scooterotica.org/forum/viewtopic.php?f=10&t=513&p=2683#p2683

beat me to it. spent the last ½ hour looking through Tidd's flickr photos, literally 000s on there... I had got to the J pics, but they're all on that scooterotica thread...
I think it was sold as a project a couple of years ago...

[Shaun]

]

http://scooterotica.org/forum/viewtopic.php?f=10&t=513&p=2683#p2683

beat me to it. spent the last ½ hour looking through Tidd's flickr photos, literally 000s on there... I had got to the J pics, but they're all on that scooterotica thread...
I think it was sold as a project a couple of years ago...

Sold as a project, to me.

Then I gave up on it, sold the SX150 frame on to a mate that built a cutdown, and I scrapped the hollow J range bit.
I think I have the panels and mudguard still though.

Shaun.

[Rich Oswald]

]

http://scooterotica.org/forum/viewtopic.php?f=10&t=513&p=2683#p2683

beat me to it. spent the last ½ hour looking through Tidd's flickr photos, literally 000s on there... I had got to the J pics, but they're all on that scooterotica thread...
I think it was sold as a project a couple of years ago...

Sold as a project, to me.

Then I gave up on it, sold the SX150 frame on to a mate that built a cutdown, and I scrapped the hollow J range bit.
I think I have the panels and mudguard still though.

Shaun.

Shame that it got shelved but glad in a way, perhaps now I can be the first

Rich'

[Shaun]

If you need the panels let me know.

I can't help on a Sx frame though

Oh, and you will a rarity, but not the first.
Centosam from 13th valley had the Black Widow in the 80's.
His was a standard J frame with a wedged in s3 lump and a rear extention on the frame to allow for the extra length of the engine

[Rich Oswald]

If you need the panels let me know.

I can't help on a Sx frame though

Oh, and you will a rarity, but not the first.
Centosam from 13th valley had the Black Widow in the 80's.
His was a standard J frame with a wedged in s3 lump and a rear extention on the frame to allow for the extra length of the engine

Cheers Shaun, I think I have got all I need. Would like to see some pics of Black Widow though.

Rich'