LCGB Forums

The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com

UNI side casing

Technical help for Series one, two and three Lambrettas. Models include the Li, Li Special, TV, SX, GP, Serveta and API/SIL models

UNI side casing

Postby gaz_powell » Sat Mar 25, 2017 6:03 pm

Had one dropped off with parts for an engine build for a mate, they are very nice. This one came ready polished to a good standard.
Pre drilled for a kickstart ramp and kickstart bushes fitted.

If this is what their blocks are gonna be like, i'll be buying a pair plus a set of their engine mounts to keep under the bed for a rainy day.......

Decent kit, decent price - that's all we want!
gaz_powell
 
Posts: 3346
Joined: Sat May 31, 2014 7:56 pm
Location: Hartlepool

Re: UNI side casing

Postby Toddy » Sat Mar 25, 2017 8:57 pm

gaz_powell wrote:Had one dropped off with parts for an engine build for a mate, they are very nice. This one came ready polished to a good standard.
Pre drilled for a kickstart ramp and kickstart bushes fitted.

If this is what their blocks are gonna be like, i'll be buying a pair plus a set of their engine mounts to keep under the bed for a rainy day.......

Decent kit, decent price - that's all we want!


They looked decent in the pictures let us know how you get on fitting it Gaz
User avatar
Toddy
 
Posts: 10166
Joined: Tue May 13, 2014 9:58 pm
Location: East Yorkshire

Re: UNI side casing

Postby gizmo » Sat Mar 25, 2017 10:46 pm

Got one from rayspeed and finish on them is spot on. Like you say, looking forward to engine casing coming out as the price should be good unlike the others on the market and if finish is like the side casing all will be spot on
gizmo
 
Posts: 674
Joined: Sat May 31, 2014 6:43 pm

Re: UNI side casing

Postby gaz_powell » Sun Mar 26, 2017 1:36 pm

Just seen in scootering mag Uni doing a maghousing aswell and they've had some great little tweaks done to the original design.
gaz_powell
 
Posts: 3346
Joined: Sat May 31, 2014 7:56 pm
Location: Hartlepool

Re: UNI side casing

Postby Topgearskin » Mon Mar 27, 2017 12:19 pm

I bought one of their rear hubs for the API Lamby. I was very nervous as it wasn't very very expensive (which seems to be the mark of anything worth fitting) but I think its great. I think you're right. Reasonably priced good quality bits - something that's been sorely missing
Topgearskin
 
Posts: 763
Joined: Thu Dec 29, 2016 1:20 pm

Re: UNI side casing

Postby gaz_powell » Mon Mar 27, 2017 1:46 pm

Everything I`ve used that is UNI Auto has been decent - I know AF sell lots of their products - Ive used a few of their hubs and engine mounts.

I would happily try their stators but ive never seen them for sale (unless its what AF sell ?)

Honk if you like UNI !

Honk, Honk !!
gaz_powell
 
Posts: 3346
Joined: Sat May 31, 2014 7:56 pm
Location: Hartlepool

Re: UNI side casing

Postby Topgearskin » Wed Mar 29, 2017 5:04 pm

gaz_powell wrote:Everything I`ve used that is UNI Auto has been decent - I know AF sell lots of their products - Ive used a few of their hubs and engine mounts.

I would happily try their stators but ive never seen them for sale (unless its what AF sell ?)

Honk if you like UNI !

Honk, Honk !!


Honk!
Topgearskin
 
Posts: 763
Joined: Thu Dec 29, 2016 1:20 pm


Return to Series 1, 2 & 3

Who is online

Users browsing this forum: SmudgeDog and 22 guests