LCGB Forums

got a bit of a clattery sound started from inside the side casing. disappears when I pull the clutch in. any ideas what I should/could be looking for before I take the side casing off?

Thanks steve

Kickstart engaging with 1st gear?

As above could be kickstart catching first gear. With the engine running hold the kickstart and pull it upwards, if the sound changes or disappears thats your answer.
Failing that you will need to remove side cover and check gearbox bearings etc for excessive wear.

no guys it's not the kickstart, I know that sound.

just looking for a list of suggestions once I get inside (if it's nothing obvious) easiest checks first.
don't want start swapping bearings etc if it could be something simpler.

cheers

Chain guide broken off...?! only one way to find out....!!!

Its something to do with your gears,cluster or plain clutch plates and endplate bearing,they're the only thing that stops spinning when you pull the clutch lever.

chain tensioner had slipped making the loose chain clattery. amplified no doubt by the fact I only had about 50ml oil in the bloody thing.

all better now and full of oil

Stevepshipley wrote:chain tensioner had slipped making the loose chain clattery. amplified no doubt by the fact I only had about 50ml oil in the bloody thing.

all better now and full of oil

But where had the oil gone