Page 1 of 1
Legshield toolbox
Posted:
Sat Jan 26, 2019 6:51 pmby John'65
Hi, I realise that most legshield toolboxes need to be shaped a little to fit good. Has anyone fitted a lynx /lince legshield box to a series 3 li ? ( not GP) if so we're they close ish or miles out ? Thank you John
Re: Legshield toolbox
Posted:
Sat Jan 26, 2019 7:53 pmby rossclark
Some of them are not all that close on a Lince...
The plastic ones with the small curved hatch are quite soft plastic, where as the larger squarer one is harder, more rigid material.
Re: Legshield toolbox
Posted:
Sat Jan 26, 2019 8:55 pmby John'65
I didn't realise there where 2 different boxes , that's news , I don't suppose you would have any links to pictures , so I could I identify the difference ? I will be trying to fit the box to a '79 jet, which will probably have different shape legshields to the Lynx / ser 80 ? Thanks again
Re: Legshield toolbox
Posted:
Sat Jan 26, 2019 10:15 pmby shane BBoys
viewtopic.php?f=19&t=3933This is a newly made metal 1
Cheers Shane
Re: Legshield toolbox
Posted:
Sat Jan 26, 2019 10:23 pmby John'65
Thanks Shane , lovely looking scooter by the way , where did you get that box from ?
Re: Legshield toolbox
Posted:
Sun Jan 27, 2019 1:41 pmby rossclark
There's this type
https://rover.ebay.com/rover/0/0/0?mpre ... 3662610236And this type
image.jpeg
Either should fit standard LI type legshields, but there's very few sets of those that you'll find that are the same shape they left the factory.
Re: Legshield toolbox
Posted:
Sun Jan 27, 2019 6:28 pmby John'65
Cheers Ross , I have seen that one on eBay , but unable to view the second pic ? Thanks
Re: Legshield toolbox
Posted:
Sun Jan 27, 2019 6:31 pmby John'65
Sorry again , I can see it now , don't think I have ever seen one like that before , which box is the most rigid ?
Re: Legshield toolbox
Posted:
Tue Jan 29, 2019 12:24 amby rossclark
Definitely the later one in the second pic but they're rarer and not pretty
