Speedo drive bush thread.
Posted: Fri Apr 19, 2019 10:50 pmDoes anybody know the thread size of the speedo drive bush?
You're bound to have one of those to check with
LCGB Forums
The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com
https://www.ilambretta.co.uk/forum/
Speedo drive bush thread.
https://www.ilambretta.co.uk/forum/viewtopic.php?f=10&t=11460
Page 1 of 1
Posted: Fri Apr 19, 2019 10:50 pmRe: Speedo drive bush thread.
Posted: Fri Apr 19, 2019 11:51 pmI'm nowhere near anywhere I can check, but believe it is the same thread as the chain case cover drain/level plugs, that being M16 x I.5
You're bound to have one of those to check with
You're bound to have one of those to check with
Re: Speedo drive bush thread.
Posted: Sat Apr 20, 2019 12:07 amI'll check tomorrow. Sods law that I've got a 16 x 1.5 die but no tap. Cheers.
Re: Speedo drive bush thread.
Posted: Sat Apr 20, 2019 2:48 amI should have the tap, if you need to borrow it.
I'm fairly sure that I used a level plug to blank off a speedo drive hole for racing
I soon realised that weight saving was a lot more important than adding bling......
I'm fairly sure that I used a level plug to blank off a speedo drive hole for racing
I soon realised that weight saving was a lot more important than adding bling......Re: Speedo drive bush thread.
Posted: Sat Apr 20, 2019 10:01 pmYep think that's right M16x1.5 - I think I also have the tap somewhere if you're stuck.