LCGB Forums

The rear part of the flywheel that goes over the crank is shorter on the one I've got for my gp than the one I've got on my sx.
Is that right? Not fitted the gp one yet thought I'd check with you lot first.

The taper on the GP crankshaft is thicker than the taper of previous models. As a result, the flywheels have a boss (centre) appropriate to each type of taper(on the crank) and are not interchangeable.

Cheers fella

Scooter Restorations sell a centre boss.http://www.scooterrestorations.com/lamb ... m6-screws/