Rear hub stud thread
Posted: Tue Nov 26, 2019 10:26 pmHi All, can anyone tell me the dia and pitch of a rear hub stud hole on a Lammy , as I want to buy a tap / die Cheers TIA
Moved into here you should get a better respone
Cheers Toddy
LCGB Forums
The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com
https://www.ilambretta.co.uk/forum/
Rear hub stud thread
https://www.ilambretta.co.uk/forum/viewtopic.php?f=10&t=12200
Page 1 of 1
Posted: Tue Nov 26, 2019 10:26 pmRe: Rear hub stud thread
Posted: Wed Nov 27, 2019 7:03 amRe: Rear hub stud thread
Posted: Wed Nov 27, 2019 10:08 amRemember its a left hand thread.What I've done in the past when a threads gone is to put in an ordinary m8 bolt and use the nut off the original stud.
Re: Rear hub stud thread
Posted: Wed Nov 27, 2019 10:24 amStd metric coarse pitch for M10 should be 1.5mm. the hub studs are left hand M10 x 1.
You can get the tap from eBay, Chinese ones are cheap enough and adequate for the job of cleaning up threads. They take abou a week to arrive.
You can get the tap from eBay, Chinese ones are cheap enough and adequate for the job of cleaning up threads. They take abou a week to arrive.
Re: Rear hub stud thread
Posted: Wed Nov 27, 2019 1:35 pmCheers guys all received and understood