Page 1 of 1

Eibar Series 2 speedo cable

PostPosted: Fri Sep 19, 2014 11:33 pm
by Storkfoot
I think this is the cable I have at the moment but it doesn't fit the pitch at the speedo end. Can anyone point me in the right direction please?

http://www.scooterrestorations.com/lamb ... es-3-grey/

It's a '62 Li150 if that makes any difference

Re: Eibar Series 2 speedo cable

PostPosted: Sat Sep 20, 2014 1:58 pm
by gaz_powell
I thought there were only Italian or indian fitments - both different in physical size and not just pitch of thread (indian smaller of the two)

Re: Eibar Series 2 speedo cable

PostPosted: Mon Sep 22, 2014 8:59 pm
by Storkfoot
Thanks for the reply, Gaz. Nothing appears to be as it seems :P .

The speedo takes the thicker cable but neither an Italian nor Indian threaded cap (on the cable) fits the thread on the Eibar speedo. At the moment, I bodged the original threaded cap onto an Italian speedo cable.

I'll have another look tomorrow and measure up the pitch of the cap and speedo.

Re: Eibar Series 2 speedo cable

PostPosted: Mon Sep 22, 2014 9:47 pm
by gaz_powell
you learn something new everyday - so eibar ones are different again !