LCGB Forums

Anyone doing the above, as it's a different length to the standard

I know knowledge on here used to do these, but dont think he does anymore...

Either hack around with a standard one and solder one of these on:

https://www.venhill.co.uk/cables-and-co ... m-ee5.html

Or, buy the Chiselspeed adjustable one:

https://www.chiselspeed.co.uk/store/product/CST005

That will give you two points to adjust the choke, assuming you use an adjuster on the carb top.

Storkfoot wrote:Either hack around with a standard one and solder one of these on:

https://www.venhill.co.uk/cables-and-co ... m-ee5.html

Or, buy the Chiselspeed adjustable one:

https://www.chiselspeed.co.uk/store/product/CST005

That will give you two points to adjust the choke, assuming you use an adjuster on the carb top.

+1 for the Chiselspeed adjustable one.

I do still make made to measure choke cables. Pm me if you want one. Ideal for people using the carb on the TS1 side of the engine.