Engine casing
Posted: Sun Oct 19, 2014 4:32 pmHELP. Can the engine mounts be welded? One has snapped 
off when putting new bushes in
off when putting new bushes inLCGB Forums
The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com
https://www.ilambretta.co.uk/forum/
Engine casing
https://www.ilambretta.co.uk/forum/viewtopic.php?f=10&t=1605
Page 1 of 1
Posted: Sun Oct 19, 2014 4:32 pmRe: Engine casing
Posted: Sun Oct 19, 2014 4:36 pmYes they can, but you'll need to use someone who is very good with ally welding, and there's always likely to be that element of doubt (PS I've deleted the repeat posts)
Re: Engine casing
Posted: Sun Oct 19, 2014 5:30 pmThank you for that I Had a bit of trouble with the Internet also trouble with engine mounts. Might look for a new one.
Re: Engine casing
Posted: Sun Oct 19, 2014 5:51 pmOberon wrote:Thank you for that I Had a bit of trouble with the Internet also trouble with engine mounts. Might look for a new one.
If it's a small block case it might be better to replace it. If it's a 200 (particularly a stamped one) then it's probably worth repairing
Re: Engine casing
Posted: Sun Oct 19, 2014 7:07 pmThank you Steveg .Will look out for one
Re: Engine casing
Posted: Mon Oct 20, 2014 6:22 pmHi just a quick note I have managed to get a 125 engine case 
to replace my broken one.
Just got to dismantle and rebuild.
to replace my broken one.Just got to dismantle and rebuild.