Page 1 of 1
torque wrench.
Posted:
Fri Aug 16, 2024 11:41 amby martyn dwane
I have two torque wrenches at present 3/8"sq & 1/2"sq drive that cover all the higher torque settings needed for a Lambretta ,Im looking for a 1/4" sq drive to cover the lower settings, any recommendations please.
TIA
Re: torque wrench.
Posted:
Fri Aug 16, 2024 6:07 pmby Toddy
I use the Halfords ones usually good quality
Re: torque wrench.
Posted:
Fri Aug 16, 2024 7:27 pmby nastro azzurro
Plus 1 for Halfords.
Re: torque wrench.
Posted:
Fri Aug 16, 2024 8:09 pmby roli150lam
+2 halfords
Re: torque wrench.
Posted:
Sat Aug 17, 2024 6:12 amby Cgt75b
+ Tool station Machine mart, Screwfix others are available.
Re: torque wrench.
Posted:
Mon Aug 19, 2024 3:16 pmby bookertmgs1
+3 for Halfords
With a 3/8th & 1/2" - you should be covered anyway.
For anything below that you should be able to guage with your hand - it just needs to be tight - not swinging off a 5' extention bar tight.
Re: torque wrench.
Posted:
Tue Aug 20, 2024 9:50 amby ULC Soulagent
Halford +4
Re: torque wrench.
Posted:
Wed Aug 28, 2024 9:43 amby Leotech
I use one for a bicycle, The kits are relatively cheap and come with a selection of Allen key and torx bits.
https://planetx.co.uk/products/jobswort ... wrench-set
Re: torque wrench.
Posted:
Wed Aug 28, 2024 11:25 amby martyn dwane
thanks, last one looks spot on ,