Rear hub bearing- which one
Posted: Sat Dec 20, 2014 10:45 amCan anyone recommend a decent rear hub bearing for a GP 200, cant get hold of an M.B. one and was warned off Casa ones. 
CBF (Italy) is also very good but quite hard to find.
LCGB Forums
The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com
https://www.ilambretta.co.uk/forum/
Rear hub bearing- which one
https://www.ilambretta.co.uk/forum/viewtopic.php?f=10&t=2109
Page 1 of 1
Posted: Sat Dec 20, 2014 10:45 amRe: Rear hub bearing- which one
Posted: Sat Dec 20, 2014 10:51 amRIV from Scootopia,
CBF (Italy) is also very good but quite hard to find.
CBF (Italy) is also very good but quite hard to find.
Re: Rear hub bearing- which one
Posted: Sun Dec 21, 2014 4:58 pmI've just put a Casa one in mine. Having loads of trouble shinmming the gearbox. Thinking of starting again with an RIV bearing
Re: Rear hub bearing- which one
Posted: Sun Dec 21, 2014 5:50 pmnever had a problem with JBL in all my motors
Re: Rear hub bearing- which one
Posted: Sun Dec 21, 2014 6:23 pmNot heard of JBL ones, personally I'd rather use an original RIV one or even SIL as never had a problem with them unlike say an MB one
Re: Rear hub bearing- which one
Posted: Sun Dec 21, 2014 7:53 pmHi thanks, gone for a Riv one in the end, heard a lot of problems with the Casa ones. Think the JBL ones are standard indian fit, thats whats in mine and was very tight and the centre where the layshaft goes through was very worn so gearbox was very sloppy.
Re: Rear hub bearing- which one
Posted: Sun Dec 21, 2014 8:44 pmWack
JBL where used by SIL (and NRB)
Ive used them in all my engine builds without any issues
Gaz
JBL where used by SIL (and NRB)
Ive used them in all my engine builds without any issues
Gaz