Page 1 of 1
who makes these ?
Posted:
Sun Jun 08, 2014 9:08 pmby johnnyjarvis
Looking for a sprint rack which fits on top of the spare wheel behind the seat.
Think that someone on here had started making them ,the post wasnt that long before the site crashed.
Re: who makes these ?
Posted:
Sun Jun 08, 2014 9:26 pmby Toddy
This type
Re: who makes these ?
Posted:
Sun Jun 08, 2014 9:40 pmby johnnyjarvis
Cheers Toddy, I got the sparewheel carrier just need the rack.
Re: who makes these ?
Posted:
Sun Jun 08, 2014 9:46 pmby Toddy
I got this one s/h of Tim on here but I know Rich Pressley used to do them but I've heard he's not had them in stock for a while unless someone else does them now
Re: who makes these ?
Posted:
Sun Jun 08, 2014 10:31 pmby Lammer205
I also looked at that thread and checked rich presley scooters i can't even find the website anymore, but did someone called Newmanlammy? join the thread saying he makes up a similar rack though in plain steel? Toddy will these racks work with sip tubeless rims? Lammer205.
Re: who makes these ?
Posted:
Sun Jun 08, 2014 10:40 pmby Toddy
Lammer205 wrote:I also looked at that thread and checked rich presley scooters i can't even find the website anymore, but did someone called Newmanlammy? join the thread saying he makes up a similar rack though in plain steel? Toddy will these racks work with sip tubeless rims? Lammer205.
I had to mod mine by grinding the bolts out and fitting longer ones as the sip rims
Are thicker
Re: who makes these ?
Posted:
Mon Jun 09, 2014 8:27 amby gaz_powell
Mine came from Mike Pheonix
Re: who makes these ?
Posted:
Mon Jun 09, 2014 4:14 pmby Rich Oswald
My home made one before I got the brackets permanently welded.
Rich'
Re: who makes these ?
Posted:
Thu Jun 12, 2014 12:04 amby corrado
Lammer205 wrote:........... will these racks work with sip tubeless rims?
Not sure with the rack in question but for the basic spare wheel carrier that sits below the sprint rack the following should work.
You need to use 4 of the 30mm long Indian cylinder head nuts, screw them on to the studs on your rack and screw 8mm crankcase studs into them. If you're carrying a split rim spare just bolt it on as normal and keep the long nuts with studs in your toolbox and use them if you have to remove your SIP rim.
Re: who makes these ?
Posted:
Mon Aug 10, 2015 10:23 pmby corrado
Anyone started making these again?
Re: who makes these ?
Posted:
Tue Aug 11, 2015 6:54 amby burnside
I'm certainly interested in one if they are
Re: who makes these ?
Posted:
Tue Aug 11, 2015 8:35 amby maz
If Keith Newman makes them his contact details were:-
newmanlammy@aol.com
Re: who makes these ?
Posted:
Tue Aug 11, 2015 8:38 amby maz
Lammer205 wrote:I also looked at that thread and checked rich presley scooters i can't even find the website anymore, but did someone called Newmanlammy? join the thread saying he makes up a similar rack though in plain steel? Toddy will these racks work with sip tubeless rims? Lammer205.
If Keith Newman makes them his contact details were:-
newmanlammy@aol.com
Re: who makes these ?
Posted:
Tue Aug 11, 2015 7:50 pmby Rich Oswald
I had to cut off the old studs and have new, longer ones welded on for it to take my tubeless rims as a spare.
Rich'
Re: who makes these ?
Posted:
Wed Aug 12, 2015 10:46 pmby burnside
Keith does make them, unfortunately I've just bought the last one but I'd imagine he'll be making more
Re: who makes these ?
Posted:
Thu Aug 13, 2015 7:28 amby Toot
Their is a guy local to us in West Cumbria that has made a few in stainless, on request. I have one and the quality/finish/fit is really good.
I can see if he willing to make up a batch and I can sell them through the LCGB Club Shop? (It will be Sept before I progress this, as no spare time at the moment).
Re: who makes these ?
Posted:
Wed Oct 07, 2015 10:41 pmby Toot
Toot wrote:Their is a guy local to us in West Cumbria that has made a few in stainless, on request. I have one and the quality/finish/fit is really good.
I can see if he willing to make up a batch and I can sell them through the LCGB Club Shop? (It will be Sept before I progress this, as no spare time at the moment).
An update on this, not sure if I'll get these produced any cheaper than another LCGB member who has advertised on the forum that he's getting a number made up:
viewtopic.php?f=17&t=4347
