LCGB Forums

Anyone got any recommendations / links for a front brake light switch for a scoot rs outboard disc brake the one that sits under the reservoir , cheers

gaz_powell wrote:https://beedspeed.com/front-brake-light-switch-hydraulic-nissin-spaq-master-p-10440.html

Cheers Gaz

Toddy,
Hang fire, I may have one kicking around that you can have. I gave Daz a master cylinder with a switch on and can't remember if it was left on the master cylinder or we took it off and left it in my garage. Unless you need one urgently, that is.

Nelly wrote:Toddy,
Hang fire, I may have one kicking around that you can have. I gave Daz a master cylinder with a switch on and can't remember if it was left on the master cylinder or we took it off and left it in my garage. Unless you need one urgently, that is.

Cheers mate no rush

Just spoke to Daz, He's going to have a check when he gets home. He says he definitely has one you can have.
I'll be at Scarborough this weekend if you are going.

Funny that I was just thinking about getting one for my GP on Sat, trust Toddy to get one for free. Still mines a Yamaha master cylinder so does anyone know what will fit that please?

Rich'

Rich,
It will all depend on the type of cylinder and the mounting type. If it's the same as this one we are discussing for Toddy, I think there's one on the cylinder I gave Daz and one he has off the cylinder on his race bike, so in theory 2 available.
Have a look at your cylinder and see where the brake switch mounts. Some mount underneath, some on the side of the lever.

Cheers Nelly I'll have a look, see you at Scarborough,

Rich'

Nelly , thanks for the offer but i'm sorted now mine was a loose connection and a bit of a clean up all good now , thanks again

Nelly wrote:Rich,
It will all depend on the type of cylinder and the mounting type. If it's the same as this one we are discussing for Toddy, I think there's one on the cylinder I gave Daz and one he has off the cylinder on his race bike, so in theory 2 available.
Have a look at your cylinder and see where the brake switch mounts. Some mount underneath, some on the side of the lever.

Had a look and I am pretty sure it mounts on the side between the lever and the headset so what do I need for this?

Rich'

Rich,
Is it something like this one?
http://www.ebay.com/itm/Front-Brake-Mas ... 1038327723
You can see where the switch screws in on there.

Toddy,
No probs, Daz dropped 2 through my door on his way to work this morning, so they will just go in the bitsa box. Let me know if you do need one later.

Nelly wrote:Rich,
Is it something like this one?
http://www.ebay.com/itm/Front-Brake-Mas ... 1038327723
You can see where the switch screws in on there.

Toddy,
No probs, Daz dropped 2 through my door on his way to work this morning, so they will just go in the bitsa box. Let me know if you do need one later.

Yes that's exactly where it fits on mine Nelly.

Rich'