Page 1 of 1
GP 150 carb
Posted:
Sun May 03, 2015 7:54 pmby kennystag
Hi
This is the pic of my carb. It says on it mik carb India, and down the bottom it says licence mikuni Japan. Anyone have any idea what size it is? And point me in the right direction on ebay that would do. Thanks for your help.
Stag
Re: GP 150 carb
Posted:
Sun May 03, 2015 10:10 pmby rossclark
Probably a 22mm or 20mm, the original on a GP 150 / 200 should be dellorto SH2/22 those are like hens teeth and cost an arm and a leg.
Jetex, also Indian, build a copy of the SH2 but they are hit and miss and its advised to at least replace the jets with genuine dellorto.
The Mikcarb is a licenced copy of a Mikuni carb fitted as standard to later model Indian Gp / Vijay.
Are you looking for a whole new one or something to replace it?
Re: GP 150 carb
Posted:
Sun May 03, 2015 10:22 pmby rossclark
Re: GP 150 carb
Posted:
Sun May 03, 2015 10:24 pmby rossclark
Re: GP 150 carb
Posted:
Mon May 04, 2015 5:21 pmby kennystag
Hi All,
How do you measure what carb you have, is it the venturi you measure.
Cheers
Stag
Re: GP 150 carb
Posted:
Mon May 04, 2015 9:12 pmby rossclark
Yes, the diameter is the Venturi, try measure it at the manifold end and see what it is.
Re: GP 150 carb
Posted:
Mon May 04, 2015 9:16 pmby kennystag
H and thanks. It was 27 mm approx.
Cheers
Stag
Re: GP 150 carb
Posted:
Mon May 04, 2015 9:37 pmby rossclark
Sorry, internal?
Re: GP 150 carb
Posted:
Mon May 04, 2015 9:47 pmby kennystag
Thanks mate,
That was the inside diameter.
Cheers
Stag
Re: GP 150 carb
Posted:
Sun Jun 07, 2015 7:12 pmby kennystag
Hi,
The carb I am using on my sil gp 150 is a makuni anybody else have any info how good or bad they are, what would be a direct replacement if I were to change.
Cheers
Kenny