Page 1 of 1

fit a battery for trying my lights ect

PostPosted: Sun Jun 07, 2015 2:54 pm
by kennystag
Hi All,
If I was to fit a battery on my GP what colour of wire on the junction box( on the frame) would I connect the positive from the battery to, this is just to try my electrics without starting the engine.
Cheers
Stag

Re: fit a battery for trying my lights ect

PostPosted: Sun Jun 07, 2015 3:46 pm
by MK Monty
Normally the brown out of the regulator. Disconnect it and I would use a 5 amp fuse between the battery and the Brown so you dont cook anything. Obviously the negative to a good ground on the frame

Re: fit a battery for trying my lights ect

PostPosted: Sun Jun 07, 2015 7:05 pm
by kennystag
Hi I do not have a regulator, just wires coming from the stator into the junction box.
Cheers
Stag

Re: fit a battery for trying my lights ect

PostPosted: Sun Jun 07, 2015 8:08 pm
by MK Monty
Remove the stator wire to the junction box and replace it with your fused supply

Re: fit a battery for trying my lights ect

PostPosted: Sun Jun 07, 2015 8:21 pm
by kennystag
Hi,
Remove which colour of wire.
Stag