Fork
Posted: Mon Nov 02, 2015 8:10 pmHi all , would the fork from a LI fit a TV 175?
Thanks
Eyeguy
Thanks
Eyeguy
The only difference will be the welded bracket for the dampers,
assuming you won't mix S1/2 with S3.
LCGB Forums
The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com
https://www.ilambretta.co.uk/forum/
Fork
https://www.ilambretta.co.uk/forum/viewtopic.php?f=10&t=4508
Page 1 of 1
Posted: Mon Nov 02, 2015 8:10 pmRe: Fork
Posted: Mon Nov 02, 2015 9:02 pm99% Yes
The only difference will be the welded bracket for the dampers,
assuming you won't mix S1/2 with S3.
The only difference will be the welded bracket for the dampers,
assuming you won't mix S1/2 with S3.
Re: Fork
Posted: Mon Nov 02, 2015 9:24 pmCould brackets be welded on?
Re: Fork
Posted: Mon Nov 02, 2015 9:28 pmSure,it is not difficult especially if the fork is out and stripped,
take care not to weld the brackets while the plastic spring stops are inside,they will melt.
take care not to weld the brackets while the plastic spring stops are inside,they will melt.
Re: Fork
Posted: Tue Nov 03, 2015 2:14 pmThanks guy's
Re: Fork
Posted: Wed Nov 04, 2015 2:02 pmSorry to second guess the fork issue but, the guy doing work on my TV stated the fork from an LI must have the chrome ring as mine does or it won't fit. Help again
Eyeguy
Eyeguy
Re: Fork
Posted: Sun Nov 08, 2015 11:12 pmthe headset is matched to the forks/chrome ring.