Page 1 of 1
Dual seat frame dimensions
Posted:
Sat Jan 09, 2016 12:08 amby 507VBH
Hi,
I have got a new cover for the dual seat on my series 2 but it seems too short. Unfortunately I cannot sure whether the frame I have is a standard Lambretta one as yhere are no markings on it.
Does anybody know the length of a normal seat frame along the top edge?
Cheers
Re: Dual seat frame dimensions
Posted:
Sat Jan 09, 2016 11:04 amby pacemaker
from the front pivot bar to the push button at the back I have 22 inches.
Re: Dual seat frame dimensions
Posted:
Sat Jan 09, 2016 12:05 pmby 507VBH
Thanks for the info! Mine is 23.3 inches from the top of the front hoop to the top of the rear hoop. Is this the measurement you took?
Cheers
Re: Dual seat frame dimensions
Posted:
Sat Jan 09, 2016 1:10 pmby pacemaker
Add an extra half an inch to mine based on your measurement. Mine Giulari frame is on an original series 3 TV
It maybe an aftermarket seat on yours.
Can you post a picture? I have also left you a personal message.
Re: Dual seat frame dimensions
Posted:
Sat Jan 09, 2016 2:54 pmby 507VBH
Hi,
Here are some pictures of the frame and the seat before I stripped off the cover. There are no identifying marks on the frame or old cover. It could well be a 1960's after-market seat - I have no history on it!
top.jpg
2016-01-09 12.33.43.jpg
2015-11-21 11.58.49.jpg
Re: Dual seat frame dimensions
Posted:
Sat Jan 09, 2016 4:16 pmby pacemaker
I think that is an aftermarket seat frame, the back of the frame is nothing like a the Giulari seat.
Keep the blue cover and see if you can get one made to fit.
Re: Dual seat frame dimensions
Posted:
Sat Jan 09, 2016 4:42 pmby 507VBH
I thought it might be a non-standard seat - thanks for your help!