Oversize lever pivots?
Posted:
Sat Jul 30, 2016 10:27 amby Leotech
Who makes or sells the over size brake and clutch lever pivot bolts, not seen them about for a while?
My clutch lever / shroud is very worn and I'm losing clutch pull because of it.
Re: Oversize lever pivots?
Posted:
Sat Jul 30, 2016 10:29 amby rossclark
Try MB or Torbay Lambretta who stocks their stuff
Re: Oversize lever pivots?
Posted:
Sat Jul 30, 2016 11:29 amby HxPaul
Most people with old scooters have to use oversized leaver pivots pins,especially on the clutch side.I got some from here and repaired mine.
http://www.ebay.co.uk/itm/LI-SX-GP-TV-S ... 46508837d2
Re: Oversize lever pivots?
Posted:
Sat Jul 30, 2016 4:21 pmby Leotech
They look pretty rough on the photo, doesn't say what diameter they are either?
I'll have a look at MB.
Re: Oversize lever pivots?
Posted:
Sun Jul 31, 2016 8:26 amby HxPaul
P&P £4.50
By the way,the pins that I have are 8mm.
Re: Oversize lever pivots?
Posted:
Sun Jul 31, 2016 11:36 amby rossclark
I bought some small bits from Torbay a while back and they refunded the difference between what it actually cost and what the webshop said for the postage immediately.
Re: Oversize lever pivots?
Posted:
Sun Jul 31, 2016 8:38 pmby Leotech
I think ill have to get some made with oversize heads and maybe 10mm shanks, its a series one and the holes are getting on for 10mm on the longest edge of the oval!
I lose about 10mm of cable pull on the clutch.