LCGB Forums

I am having trouble figuring out the proper mounting for my Li 62/3 125. The picture shows what I have. The anti vibration pad came off my series 2. I have seen different options. Would someone have a picture you could post.
Thanks
eyeguy

Thanks Dimitrios, just what I needed. The bolts I have are way to long. I will get shorter ones.
Cheers
Eyeguy

So After a couple weeks of trying to find the original coil bracket hdwe, I decided to restore the one I have. I think it turned out very good. Now my question is does this look like the proper way it is to be mounted?
Look at photo above to compare the final restoration of the antivibration pad and parts

Thanks
eyeguy

You don't need the spacers,just shorter bolts
The spacers are used on the later models that don't have the pad.
You are also missing this part,like S1 and S2.

http://sco1.scooter-center.com/en/produ ... ZUENDSPULE

If you want you can use the spacers without the pad.

Eye guy

If you want one I'll send you my old one. PM me

Hi dimitrios, I have the grounding piece on order. should be here soon. Am I correct in thinking that the piece hits the frame to make a ground?

Thanks
eyeguy

Dimitrios, Is that diagram for the early series 3?

Yes,from an early S3 parts book with 4 pole ducati ignition.
You just need to rotate the set up in your mind
don't know why the Italians drew it this way,they were trolling us

In theory yes,it is an earth plate,it connects the support plate (23) that fixes the coil with the frame (earthed) screws.