Page 1 of 1
Toolbox Door?
Posted:
Mon Oct 10, 2016 2:06 pmby davla
Does anyone know where I can get a decent fitting toolbox door please? I bought one from a 'reputable' dealer and it won't open without fouling the frame......or has anyone got a good secondhand one pls? Thanks, Dave
Re: Toolbox Door?
Posted:
Mon Oct 10, 2016 2:13 pmby AlG
I thought I had this problem and tried four different doors before finding that the hinge bracket on the frame was welded to low. The doors were all nigh on perfect. Might be worth checking.
Re: Toolbox Door?
Posted:
Mon Oct 10, 2016 2:52 pmby HxPaul
The toolbox door hinge is quite long and can be bent so that the door fits better.
Re: Toolbox Door?
Posted:
Mon Oct 10, 2016 7:21 pmby davla
Yeah cheers for this advise but I have bu**ered up the hinge on my original door by trying to 'adjust' it!
Re: Toolbox Door?
Posted:
Mon Oct 10, 2016 7:41 pmby xenia1
Thats the exact same problem i had until i found a nos one at wclw usa, theyve led a 40+ year hard life with only a bent piece of steel for a hinge with a pin through the centre. The three or four i tried all had a gap around the edge and wobbly hinges even with a new hinge pin..
Re: Toolbox Door?
Posted:
Mon Oct 10, 2016 7:51 pmby tim_mason
I have some new hinges if you want to replace a bent one.