Page 1 of 1
Rimini Legshield toolbox
Posted:
Sat Dec 10, 2016 4:08 pmby lammydave
Thinking of getting the narrow legshield toolbox that rimini sell.. copy of the one fitted to the SX Twin..
Anyone got one.. easy to fit etc??
Re: Rimini Legshield toolbox
Posted:
Sat Dec 10, 2016 4:31 pmby Covboy
I've got one. Easy to - you have to drill the legshield though.
And you can fit quite a lot of stuff in it
Re: Rimini Legshield toolbox
Posted:
Sat Dec 10, 2016 6:15 pmby lammydave
Covboy wrote:I've got one. Easy to - you have to drill the legshield though.
And you can fit quite a lot of stuff in it
Thanks, covboy
is it just the one hole, at the top....
and did the profile fit the leggies ok?
Re: Rimini Legshield toolbox
Posted:
Sun Dec 11, 2016 9:11 amby Covboy
I'll post some pics later
Re: Rimini Legshield toolbox
Posted:
Sun Dec 11, 2016 10:12 amby dave411
Its a much better fit than any metal one.No triming neededon mine.I used a Riv Nut for the top fixing,much easier to fit.
Re: Rimini Legshield toolbox
Posted:
Sun Dec 11, 2016 2:51 pmby Covboy
[url][/url]Yes - drilled fixing is at the top. Bolt and riv nut would have been much easier. I used a self tapping screw and found it quite a task to tighten due to the angle ...
What I like is the fact that the toolbox is almost invisible from the side due to its narrow profile.
Re: Rimini Legshield toolbox
Posted:
Sun Dec 11, 2016 2:52 pmby Covboy
For some reason posting with my iPad, I can never seem to get the images to be the right way around....
Re: Rimini Legshield toolbox
Posted:
Sun Dec 11, 2016 3:52 pmby rossclark
Anyone tried one on a GP?
Re: Rimini Legshield toolbox
Posted:
Sun Dec 11, 2016 5:20 pmby lammydave
brilliant! Thanks, Covboy, great help... have ordered one!
And I think, rossclark, they are only made for li/sx/tv profiles