Page 1 of 1
Fitting a Cuppini SX flyscreen probs
Posted:
Thu Dec 29, 2016 6:30 pmby Fireman Ash
Has anybody experienced the bottom part of the Cupinni SX flyscreens fouling the top legshields/beading ? Not able to get a full lock left or right, so not much use. My mate had to get a bubble screen trimmed but can't see what I'm doing wrong as not a lot to get wrong, very strange.
May have to return as my route to work isn't in a straight line.
Cheers all.
Ash
Re: Fitting a Cuppini SX flyscreen probs
Posted:
Thu Dec 29, 2016 9:18 pmby missing lynx
a picture would be handy
Re: Fitting a Cuppini SX flyscreen probs
Posted:
Thu Dec 29, 2016 10:35 pmby Fireman Ash
Haha, I knew you'd ask that, it's the bottom part of the screen , both sides, which makes contact with the top parts of the legshields when you turn left and right, no room up or down to help as its placed initially over the headlight, plus it's dark in my electric free shed lol
Re: Fitting a Cuppini SX flyscreen probs
Posted:
Fri Dec 30, 2016 12:20 amby missing lynx
how have you got it positioned on the headset is it close to the rim or the speedo?
Re: Fitting a Cuppini SX flyscreen probs
Posted:
Fri Dec 30, 2016 5:39 pmby Fireman Ash
Turns out my Spanish Series 80 SX lower headset curve is lower than that of an Italian one which explains why it won't clear the legshields
Re: Fitting a Cuppini SX flyscreen probs
Posted:
Sun Jan 01, 2017 10:28 amby peejay
i have in the past used a hot air gun to warm the plastic up and put more of a curve in the screen