Page 1 of 1
Oil capacity on Italian LI 125 1960
Posted:
Sat Feb 18, 2017 3:14 pmby gunfox
Hi All.
In My Haynes manual it states that the gear oil capacity is one & a quarter litres, but I can only get 550ml in before it comes out the level hole, I put it in very slowly, until it starts to come out, then wait about ten minutes before trying again (very slowly) but it shows it full, am I missing something I should be doing?
Re: Oil capacity on Italian LI 125 1960
Posted:
Sat Feb 18, 2017 3:50 pmby Digger
1.4 litres is about double what you need - when it comes out the level hole you've added enough.
What you should be doing is binning the Haynes and get Sticky's.
Re: Oil capacity on Italian LI 125 1960
Posted:
Sat Feb 18, 2017 4:15 pmby HxPaul
700ml from dry (ie.rebuilt gearbox, etc.).500ml wet (ie.oil change)
Re: Oil capacity on Italian LI 125 1960
Posted:
Sat Feb 18, 2017 4:41 pmby gunfox
Thank you all for that.
Bike is running now, but carb leaks a bit, so just going to buy new one, too old to muck about trying to sort out old one.
Re: Oil capacity on Italian LI 125 1960
Posted:
Sat Feb 18, 2017 5:44 pmby Warkton Tornado No.1
so just going to buy new one, too old to muck about trying to sort out old one.
....if only marriage licenses were like the TV type, renewable every year......
Re: Oil capacity on Italian LI 125 1960
Posted:
Sun Feb 19, 2017 4:17 pmby byron
gunfox wrote:Hi All.
In My Haynes manual it states that the gear oil capacity is one & a quarter litres
1ΒΌ
pints maybe...