Chain case studs
Posted:
Sun Feb 19, 2017 6:18 pmby Watfordwhite
Going to replace mt change case bolts with stainless Allan studs. Anybody know what length and size please?
Re: Chain case studs
Posted:
Sun Feb 19, 2017 6:31 pmby Digger
Allan studs? I assume you mean bolts?
If so be aware that they used studs for a very good reason - steel is much tougher than the alloy that they screw in to.
Re: Chain case studs
Posted:
Sun Feb 19, 2017 6:37 pmby MickYork
Re: Chain case studs
Posted:
Sun Feb 19, 2017 7:02 pmby Wack
Take out your old studs and measure,I think the side casing ones are M6x 40 mm.I have a set in the shed but buy them from other traders on Ebay as they are considerably cheaper than a scooter dealer and I use nylock flange nuts so no messing with washers.
http://www.ebay.co.uk/itm/321249479526? ... EBIDX%3AIT http://www.ebay.co.uk/itm/M4-M5-M6-M8-M ... ADmDeMjizw
Re: Chain case studs
Posted:
Tue Feb 21, 2017 2:41 amby corrado
I wouldn't use stainless, I use Black high tensile ones and I never use nylock on studs as it can draw the stud out when removing.