engine mount holes
Posted: Tue May 16, 2017 9:34 pmcan someone please remind me what position the holes should be on the two hole mounts.
LCGB Forums
The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com
https://www.ilambretta.co.uk/forum/
engine mount holes
https://www.ilambretta.co.uk/forum/viewtopic.php?f=10&t=8378
Page 1 of 1
Posted: Tue May 16, 2017 9:34 pmRe: engine mount holes
Posted: Wed May 17, 2017 8:34 pmcan anyone help me out as I cant find my manual .I have decent looking 2 hole mounts fitted.drive side the holes are at 5 to 12,and 5 past.Flywheel side is at quarter to 12, and 5 to 12.Anyone know if this is about right.?
Re: engine mount holes
Posted: Wed May 17, 2017 9:42 pm2 hole type voided type mounts
Flywheel side 8 and 10 o clock
Kickstart side 10 and 1 o clock
Flywheel side 8 and 10 o clock
Kickstart side 10 and 1 o clock
Re: engine mount holes
Posted: Wed May 17, 2017 10:09 pmHi, just checked in book and says Vulcan brand 2 hole mounts with the holes facing forward so that the kickstart side has holes at 2 0' clock and 4 0' clock.The flywheel side holes at 8 0' clock and 10 0' clock. These mounts have softer construction . Hope this may be of some help regards Dennie.
Re: engine mount holes
Posted: Wed May 17, 2017 10:18 pmcheers Gaz.
Re: engine mount holes
Posted: Wed May 17, 2017 10:20 pmand Dennie