Page 1 of 1
Rear Wheel Carrier - SIP Tubeless
Posted:
Tue Jun 13, 2017 9:21 amby foremanbob
Looking for a rear wheel carrier to hold a spare SIP tubeless....
Style similar to this... obviously the studs wont fit... anyone any bright ideas other than grinding out the short studs and replacing them?
Re: Rear Wheel Carrier - SIP Tubeless
Posted:
Tue Jun 13, 2017 9:47 amby Solid Air
Hi Bob, I had this problem so removed the four studs from the carrier and fitted M8 rivnuts in their place then secured the wheel in position with four bolts.
Hope this helps
Mark
Re: Rear Wheel Carrier - SIP Tubeless
Posted:
Tue Jun 13, 2017 12:20 pmby Toddy
Solid Air wrote:Hi Bob, I had this problem so removed the four studs from the carrier and fitted M8 rivnuts in their place then secured the wheel in position with four bolts.
Hope this helps
Mark
+1
Re: Rear Wheel Carrier - SIP Tubeless
Posted:
Tue Jun 13, 2017 1:59 pmby Granty
Guys, I used 4 extended cylinder head nuts, screwed them onto the carrier and then used 4 Allen bolts to fix the rim to the carrier, worked well.
Re: Rear Wheel Carrier - SIP Tubeless
Posted:
Tue Jun 13, 2017 10:23 pmby burnside
I used stud extenders/connectors on each of the existing studs, then bolt the rim in with M8 bolts
Re: Rear Wheel Carrier - SIP Tubeless
Posted:
Thu Jun 15, 2017 10:54 pmby rossclark
Granty wrote:Guys, I used 4 extended cylinder head nuts, screwed them onto the carrier and then used 4 Allen bolts to fix the rim to the carrier, worked well.
Also done this