Page 1 of 1

Paint volume

PostPosted: Thu Sep 21, 2017 3:40 pm
by 69GP225
Hello,

How much paint do I need to paint most of a series 3 in one colour?

Thanks Lee

Re: Paint volume

PostPosted: Fri Sep 22, 2017 9:12 am
by Hammer RB230
I'm pretty sure I have used approx a litre in the past. Always buy a bit more than you think you need in my experience.

Re: Paint volume

PostPosted: Sat Sep 23, 2017 1:01 pm
by 69GP225
Thanks mate.

Regs lee

Re: Paint volume

PostPosted: Sat Sep 23, 2017 10:03 pm
by MK Monty
All depends on what paint you are using. Celi will use mix of 50/50 paint thinners, you may go even less paint more thinners so you will get 2 Lt of paint. 2 pack uses a lot less thinners plus the hardner activator so you may need a bit more. It's all the tinware and bits that use it up. If you are going to wet sand and buff another coat is sacrificed

Re: Paint volume

PostPosted: Sun Sep 24, 2017 11:11 am
by steve t
Hi when I painted my series 3 I used a litre of base coat which equals 2 litres thinned and a couple of litres of lacquer 2 pack it also depends on the colour ( some colours cover easier than others ). Also the colour of the primer being covered . It's best to have a bit left over than not enough . I painted mine fiat 500 baby blue and it took some right covering my advice is take your time because a paint job can make or break a scooter plus paint an materials aren't cheep .

Re: Paint volume

PostPosted: Sun Sep 24, 2017 11:26 am
by 69GP225
Thanks guys.

The painter is using 2 pack paint. I can't wait to get this bike built. Got some really tasty original accessories for the bike. No lights or mirrors thank god, just got to get my hands on my mates fluted vigano horncast embellisher and I'm done. Good thing about these bikes is we all have different taste!

Going for white and blue with chrome.