Series 3 / J Range
Posted: Wed Aug 13, 2014 1:05 pmHas anybody ever put a series 3 engine into a J Range and if so has anyone got any pic's?
Cheers,
Rich'
Cheers,
Rich'
LCGB Forums
The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com
https://www.ilambretta.co.uk/forum/
Series 3 / J Range
Page 1 of 1
Posted: Wed Aug 13, 2014 1:05 pmRe: Series 3 / J Range
Posted: Wed Aug 13, 2014 9:04 pmThere was someone a few years ago , who put an s1/2/3 frame tube in a j range complete with engine. I know it sounds bonkers and I can't remember how it was done , but there were pics, I think it was someone from Norfolk , and may of been on the ....eherm..."other" forum
Re: Series 3 / J Range
Posted: Wed Aug 13, 2014 9:18 pmRe: Series 3 / J Range
Posted: Wed Aug 13, 2014 9:29 pmCheers Russ that's just what I wanted and similar to what I have in mind. Do you know if this project was ever completed and the scooter put into use. I think engine wise something a little more subtle will suffice, lol.
Rich'
Rich'
Re: Series 3 / J Range
Posted: Wed Aug 13, 2014 9:32 pm]
I think it was sold as a project a couple of years ago...
beat me to it. spent the last ½ hour looking through Tidd's flickr photos, literally 000s on there... I had got to the J pics, but they're all on that scooterotica thread...carlos fandango wrote:http://scooterotica.org/forum/viewtopic.php?f=10&t=513&p=2683#p2683
I think it was sold as a project a couple of years ago...
Re: Series 3 / J Range
Posted: Wed Aug 13, 2014 10:47 pmbyron wrote:]beat me to it. spent the last ½ hour looking through Tidd's flickr photos, literally 000s on there... I had got to the J pics, but they're all on that scooterotica thread...carlos fandango wrote:http://scooterotica.org/forum/viewtopic.php?f=10&t=513&p=2683#p2683
I think it was sold as a project a couple of years ago...
Sold as a project, to me.
Then I gave up on it, sold the SX150 frame on to a mate that built a cutdown, and I scrapped the hollow J range bit.
I think I have the panels and mudguard still though.
Shaun.
Re: Series 3 / J Range
Posted: Thu Aug 14, 2014 11:54 amShaun wrote:byron wrote:]beat me to it. spent the last ½ hour looking through Tidd's flickr photos, literally 000s on there... I had got to the J pics, but they're all on that scooterotica thread...carlos fandango wrote:http://scooterotica.org/forum/viewtopic.php?f=10&t=513&p=2683#p2683
I think it was sold as a project a couple of years ago...
Sold as a project, to me.
Then I gave up on it, sold the SX150 frame on to a mate that built a cutdown, and I scrapped the hollow J range bit.
I think I have the panels and mudguard still though.
Shaun.
Shame that it got shelved but glad in a way, perhaps now I can be the first
Rich'
Re: Series 3 / J Range
Posted: Thu Aug 14, 2014 10:20 pmIf you need the panels let me know.
I can't help on a Sx frame though
Oh, and you will a rarity, but not the first.
Centosam from 13th valley had the Black Widow in the 80's.
His was a standard J frame with a wedged in s3 lump and a rear extention on the frame to allow for the extra length of the engine
I can't help on a Sx frame though
Oh, and you will a rarity, but not the first.
Centosam from 13th valley had the Black Widow in the 80's.
His was a standard J frame with a wedged in s3 lump and a rear extention on the frame to allow for the extra length of the engine
Re: Series 3 / J Range
Posted: Mon Aug 18, 2014 8:16 pmShaun wrote:If you need the panels let me know.
I can't help on a Sx frame though
Oh, and you will a rarity, but not the first.
Centosam from 13th valley had the Black Widow in the 80's.
His was a standard J frame with a wedged in s3 lump and a rear extention on the frame to allow for the extra length of the engine
Cheers Shaun, I think I have got all I need. Would like to see some pics of Black Widow though.
Rich'