1955 Model D150 - Wiring loom routing
Posted:
Wed Oct 02, 2019 4:07 pmby Big Al
Can anyone explain how and where a new wiring loom should be routed on a bare frame please?
Is it best done before the engine is installed, or afterwards?
Re: 1955 Model D150 - Wiring loom routing
Posted:
Wed Oct 02, 2019 9:30 pmby jbcollier
Cable routing photos can be found here:
https://jbcollier.smugmug.com/Scooter/scroll down.
Re: 1955 Model D150 - Wiring loom routing
Posted:
Thu Oct 03, 2019 11:25 amby Steve J
Assuming the wiring loom on the D is very similar to the LD, it must be installed before the engine is fitted, as a section of the loom passes underneath the engine, on the upper side of the frame member! Control cable routing is less of an issue, maybe easier to fit some cables before the legshields are fitted.
Re: 1955 Model D150 - Wiring loom routing
Posted:
Sun Oct 06, 2019 12:15 pmby Big Al
Many thanks for your replies.