1st round bsso (pics added)

[Dazts1]

Scooter racing at croft this weekend as the bsso championship begins , 4 races.

[bike grim]

Have a good one. Hope its not too windy.

[Dazts1]

Yes very windy yesterday. The circuit clerk wasn't going to let them race. After much debate and meeting , and a raising of hands he let them out for the 2nd race !

[Dazts1]

Got a few pics.

[dscscotty]

Some great racing today (Sunday) spent some time with a few of the racers and teams, team srp in particular, got some info from one of Stuart Day races( SRP Group six) for all us road going riders, his group 6 on I think LI 150 gear set@16x46=4.9 revving to 13000rpm! wow! next time your out look at your rev counter.

[Dazts1]

Also supplying team SRP with some quality DSC race proven products ! Which proved there worth on the track today !

[dscscotty]

Phew, was glad when Chris Geyton crossed the line in the last race, don't know which of us was happier?

[Toddy]

Great pics Daz and well done scotty

[peejay]

Yes very windy yesterday. The circuit clerk wasn't going to let them race. After much debate and meeting , and a raising of hands he let them out for the 2nd race !

was it just the scoots that missed their first race cos of the wind?

[Dazts1]

Hi Pete.
Sorry I didn't make that sound correct. The scoots were out for the 1st race (wet ). The 2nd race on the Saturday was the issue. The wind got up and the clerk said it was too windy for scooters. He let 125 bikes out though. You can imagine the lads weren't happy. In the end after a meeting he let them out !

[dscscotty]

Also supplying team SRP with some quality DSC race proven products ! Which proved there worth on the track today !

Just to clarify one of the srp Group 4 lads (Chris Geyton) blew his crank on Saturday and Daz contacted me to see if we could help out? After a rummage in the garage I found some webs (indian) a 22x16x18 rod and bearing and after an hour or so in the shed pressed up a crank. which I delivered to the track 8pm Satdy night. SRP Got to work on it and he was out racing Sunday, I was a little nervous to say the least as it was just a Jap road spec bearing and a bit of locktite to hold the pin. After discussing with Paul Baker and Chris what sort of bhp/ rpm it would reach I was informed it touching 37bhp and hit around 12000 rpm. He managed to finish his 2 races and a re-started race so he actually done 2 and half races, finishing 3rd in the last race. Lets just say I was counting down the laps!

[Dazts1]

Here's a few pics from Sunday , earlier pics are Saturday.

[Dazts1]

And Mr Scott asked me to take a pic of this outfit for peejay. He said he would know why.

[sherpadean]

Cracking photos...............

[dscscotty]

Good report here from Team SRP
http://www.srpracetech.com/race-reports ... -28-04-15/

[peejay]

Hi Pete.
Sorry I didn't make that sound correct. The scoots were out for the 1st race (wet ). The 2nd race on the Saturday was the issue. The wind got up and the clerk said it was too windy for scooters. He let 125 bikes out though. You can imagine the lads weren't happy. In the end after a meeting he let them out !

hi Daz
glad you got out, talk about double standards
i'm afraid my many years of dealing with the ACU and "officialdom" was not always plain sailing, the number of times i just had to bite my tongue, some of these blokes just seem to have a problem with "small wheels" in general.

[peejay]

And Mr Scott asked me to take a pic of this outfit for peejay. He said he would know why.

111............... the number of racing legend Roly Caldecutt