Muggy powered '62 Li3

[Matty73]

image.jpg

image.jpg

image.jpg

[shane BBoys]

Very nice. I used to have the 186 on my old LI Spanish
The 1st time was 45 mark 1 with a porcupine head & it
Was fast as, till the carb came loose and she bloo.
I then had a mark 4 with the dowels etc but never
Liked that, sold it on to fund latest project( see jet set)
Cheers Shane,

[Covboy]

Very nice indeed

[Toddy]

Nice Job

[Matty73]

Very nice. I used to have the 186 on my old LI Spanish
The 1st time was 45 mark 1 with a porcupine head & it
Was fast as, till the carb came loose and she bloo.
I then had a mark 4 with the dowels etc but never
Liked that, sold it on to fund latest project( see jet set)
Cheers Shane,

Cheers, It's the 198 with 26mm phbh, varitronic & ancillotti. Not the fastest scoot in the world but goes well enough for my liking. Not really fully caned it yet.

[dave411]

hurrah,finally found someone withe the same set up thatI will be using.
Are you using the Li 150 gearbox?Also,what spec jetting are you using?The carb I have hasnust got whatever jets it came out of the factory with,so I am sure they will need changing.Just looking for a starting point really.

[Matty73]

:D hurrah,finally found someone withe the same set up thatI will be using.
Are you using the Li 150 gearbox?Also,what spec jetting are you using?The carb I have hasnust got whatever jets it came out of the factory with,so I am sure they will need changing.Just looking for a starting point really.

Hi, it is a 150 gearbox. Carb settings (set up by camlam) are;
106 main
AV266
53 pilot
50 starter
X7 needle
Air screw about 1 1/2 turns
Note that it's through a breathe sweet filter.

[dave411]

Yep,me too.