Page 1 of 1

SIP Speedo fault

PostPosted: Tue May 05, 2015 8:57 pm
by michaeltv2000
My sip speedometer has been working fine for the last 200 miles but 30 miles ago the speedo started reading 15mph under according to the
rev counter.So when the counter was reading 6500rpm the speedo was reading 50mph. Has anybody any ideas why? Mike

Re: SIP Speedo fault

PostPosted: Wed May 06, 2015 5:38 pm
by Wack
Where's it getting the reading from, cable or sensor?

Re: SIP Speedo fault

PostPosted: Fri May 08, 2015 11:04 am
by michaeltv2000
Cable

Re: SIP Speedo fault

PostPosted: Tue Dec 08, 2015 5:36 pm
by michaeltv2000
Problem solved by fitting another worm drive and the hub drive.