The power jet pipe that runs from the float bowl to the bell mouth appears to have a blockage near the top.
I can feel something hard in there.....is this normal?
Don't wanna go digging around dislodging something that should be there.
LCGB Forums
The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com
Mikuni TMX30
9 posts
• Page 1 of 1
Mikuni TMX30
by molibdimum » Mon Aug 24, 2015 1:13 pm
- molibdimum
- Posts: 5
- Joined: Thu Jun 11, 2015 9:34 am
Re: Mikuni TMX30
by rossclark » Mon Aug 24, 2015 7:11 pm
You sure it's not just a bulge in the tube that hold the pipe on?
-
rossclark - Posts: 2855
- Joined: Fri May 30, 2014 11:23 pm
- Location: Lanarkshire
Re: Mikuni TMX30
by rossclark » Mon Aug 24, 2015 7:14 pm
Like this?
You do not have the required permissions to view the files attached to this post.
-
rossclark - Posts: 2855
- Joined: Fri May 30, 2014 11:23 pm
- Location: Lanarkshire
Re: Mikuni TMX30
by molibdimum » Tue Aug 25, 2015 9:24 pm
No its not a bulge its definitely something inside.
Feels like something plastic near the top.
Feels like something plastic near the top.
- molibdimum
- Posts: 5
- Joined: Thu Jun 11, 2015 9:34 am
Re: Mikuni TMX30
by rossclark » Wed Aug 26, 2015 7:32 pm
There's definitely nothing in the pipe on mine.
Pull it off and try poke something down the tube.
Pull it off and try poke something down the tube.
-
rossclark - Posts: 2855
- Joined: Fri May 30, 2014 11:23 pm
- Location: Lanarkshire
Re: Mikuni TMX30
by Warkton Tornado No.1 » Wed Aug 26, 2015 9:36 pm
Why does this put me in mind of that film? What was it called?
It might have been 'Alien'
It might have been 'Alien'
- Warkton Tornado No.1
- Posts: 2230
- Joined: Sun Jan 11, 2015 1:27 pm
Re: Mikuni TMX30
by molibdimum » Thu Aug 27, 2015 8:43 am
Feck it Im gonna poke it out and see what it is.
Watch this space
Watch this space
- molibdimum
- Posts: 5
- Joined: Thu Jun 11, 2015 9:34 am
Re: Mikuni TMX30
by rossclark » Fri Aug 28, 2015 12:30 am
Possibly a BB somebody put in to block off the pj...
Let us know!
Let us know!
-
rossclark - Posts: 2855
- Joined: Fri May 30, 2014 11:23 pm
- Location: Lanarkshire
Re: Mikuni TMX30
by molibdimum » Fri Aug 28, 2015 9:43 am
After looking at a mates carb last night it turns out what ever is in the pipe must be normal because his is the same.
I'm not going to poke it out now but I would like to know what it is.
I'm not going to poke it out now but I would like to know what it is.
- molibdimum
- Posts: 5
- Joined: Thu Jun 11, 2015 9:34 am
9 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 10 guests