LCGB Forums
The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com
main jet
4 posts
• Page 1 of 1
main jet
by stonerosesmod » Wed Jul 09, 2014 10:09 pm
What size main jets are you guys using in mugello 186/200s? Using a 120 in mine with a 26phbh, ram air and ancillotti but camlam site says 102 for a main?
- stonerosesmod
- Posts: 101
- Joined: Tue Jun 03, 2014 9:11 pm
Re: main jet
by Toddy » Thu Jul 10, 2014 6:18 am
This was the jetting for a mugello 198 dynod last year
28mm PHBH/JL3 exhaust
Pilot 55
Choke 70
Main Jet 114
Atomiser AV268
Slide 50
Needle X7 P3
28mm PHBH/JL3 exhaust
Pilot 55
Choke 70
Main Jet 114
Atomiser AV268
Slide 50
Needle X7 P3
-
Toddy - Posts: 10222
- Joined: Tue May 13, 2014 9:58 pm
- Location: East Yorkshire
Re: main jet
by stonerosesmod » Thu Jul 10, 2014 12:54 pm
Cheers Toddy,
Ive been running with a JL3 and the ancillotti very recently went back on as i prefer it but never bothered dropping main jet as i knew its safe.Ive got a 110 and a 115 so ill try those with a plug chop and maybe save some fuel
Ive been running with a JL3 and the ancillotti very recently went back on as i prefer it but never bothered dropping main jet as i knew its safe.Ive got a 110 and a 115 so ill try those with a plug chop and maybe save some fuel
- stonerosesmod
- Posts: 101
- Joined: Tue Jun 03, 2014 9:11 pm
Re: main jet
by Rich Oswald » Thu Jul 10, 2014 4:23 pm
I set a 198 Muggy up recently with a 100 main jet on a 26mm phbh and the dyno operator upped it to a 110 but it is now very thirsty. This was with a breath sweet and st'd Clubman.
Rich'
Rich'
-
Rich Oswald - Posts: 9598
- Joined: Fri May 30, 2014 3:30 pm
- Location: Wiseman From The East (East Of The Pennines That Is)
4 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 7 guests