LCGB Forums

The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com

Skip to content

jetex carb

Want to know which carb to choose? Having problems setting up the jetting details on your scooter? Wheter you are using a standard or tuned carb, ask your question here.
Post a reply

jetex carb

Postby chips » Sun Jun 19, 2016 12:30 pm

Running a jetex carb. Sticker next to the mixture screw says keep max 3/4 of a turn. Do I ignore this? On a dellorto I normally start at 1 1/2 turns. Please advise. Thanks.
chips
 
Posts: 3
Joined: Fri Jun 17, 2016 9:55 pm
Top

Re: jetex carb

Postby johnnyXS » Sun Jun 19, 2016 2:28 pm

yes ignore that.
This is quite a good guide
http://www.mbscooters.co.uk/info/setting-up-*-engine-carbs-3/setting-up-*-engine-carbs-2+151.html

I always recommend setting the idle circuit first . Adjust the idle speed and air mixture screws until you have a stable idle before moving on .
johnnyXS
 
Posts: 969
Joined: Tue Feb 10, 2015 2:00 pm
Top

Re: jetex carb

Postby chips » Thu Jul 07, 2016 5:55 pm

I thought so, Cheers johnnyXS . :D
chips
 
Posts: 3
Joined: Fri Jun 17, 2016 9:55 pm
Top
Post a reply

Return to Carburettors

Who is online

Users browsing this forum: No registered users and 4 guests

Powered by phpBB® Forum Software © phpBB Group