LCGB Forums

The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com

MPG

Want to know which carb to choose? Having problems setting up the jetting details on your scooter? Wheter you are using a standard or tuned carb, ask your question here.

MPG

Postby 68Sxandy » Mon Sep 12, 2016 1:52 pm

Can anybody give me a rough idea on the sort of MPG I should be getting from my SX186 Mugello, 28mm Phbh open carb and (wait for it) a reverse cone vw exhaust.
I have worked out that yesterday on the way back from the WOT rally I was getting approximately 43 mpg :o riding at no more than 50mph.
Just wondered if it sounds right ?

PS: I apologise to anyone and everyone who seemed a little surprised by my anti social exhaust - certainly meant the car drivers heard me coming :lol:
68Sxandy
 
Posts: 177
Joined: Sat May 31, 2014 11:23 am
Location: Warwickshire

Re: MPG

Postby MickYork » Mon Sep 12, 2016 2:52 pm

That's similar to what I get on my Avanti. 35mm Mikuni, Franspeed race with 4.8 final gearing and 25+ stone with gear on board :o

I have noticed that headwinds and hills can make a very big difference, even getting down to 30 mpg in some cases (headwind, continuously up-hill, on an Autobahn in Germany). Likewise I've had over 50mpg with a tailwind......
MickYork
 
Posts: 1476
Joined: Sun Jun 01, 2014 8:37 am

Re: MPG

Postby Tony Hart » Mon Sep 12, 2016 9:19 pm

I get just over 40mpg running a Mugello 185 with a 26mm PHBH and a 42mm Ancilloti all strapped inside an totally un-aerodynamic Spanish S2 :D This is nearly half what I get from an iron barrelled 175 with a 20mm carb but probably twice the fun on longer rides

Tony
User avatar
Tony Hart
 
Posts: 610
Joined: Sat May 31, 2014 10:12 pm
Location: Rutland

Re: MPG

Postby 68Sxandy » Tue Sep 13, 2016 7:25 am

I guess it sounds about right then, it was set up on the dyno at Diablo a couple of years ago.

Thanks for the replies guys.
68Sxandy
 
Posts: 177
Joined: Sat May 31, 2014 11:23 am
Location: Warwickshire


Return to Carburettors

Who is online

Users browsing this forum: No registered users and 4 guests