Jetting for 150 with 22mm Jetex
Posted: Sat Mar 18, 2023 12:29 pmAs per title.
Does anyone have a ballpark figure for jetting LI150 with a Jetex 22mm
Does anyone have a ballpark figure for jetting LI150 with a Jetex 22mm
LCGB Forums
The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com
https://www.ilambretta.co.uk/forum/
Jetting for 150 with 22mm Jetex
https://www.ilambretta.co.uk/forum/viewtopic.php?f=6&t=15388
Page 1 of 1
Posted: Sat Mar 18, 2023 12:29 pmRe: Jetting for 150 with 22mm Jetex
Posted: Sat Mar 18, 2023 9:45 pmWhy not start with the jetting for the standard GP150?
Re: Jetting for 150 with 22mm Jetex
Posted: Sun Mar 19, 2023 12:02 pmOk. I looked for that and found a page.
I didn’t realise a 22mm jetex doesn’t fit a standard small block inlet manifold. I’ve been away from standard for too long.
I didn’t realise a 22mm jetex doesn’t fit a standard small block inlet manifold. I’ve been away from standard for too long.
Re: Jetting for 150 with 22mm Jetex
Posted: Sun Mar 19, 2023 11:29 pmI think the 22mm style standard carb manifolds are readily available. Try Scootopia or Scooter Restorations.