Page 1 of 1
Mikuni tmx
Posted:
Mon Sep 30, 2024 12:45 pmby Jamjo
TMX 35 Does anyone know if there should be a spring and o ring /washer on the air screw . The blow up diagram on the web shows these parts but I’ve took mine apart and there isn’t any in place . Any one got any info on this and where I can get said parts if needed
J
Re: Mikuni tmx
Posted:
Mon Sep 30, 2024 4:13 pmby Fast n Furious
The parts you refer to are:-
O-ring part number:-N133.037 002-858
Washer part number:- VM12/33 002-856
These are not needed on the TMX35 though. Just need the screw and spring.
Re: Mikuni tmx
Posted:
Mon Sep 30, 2024 4:34 pmby Jamjo
Hi F and f is the spring needed just to put my mind at rest it hasn’t fallen out
Re: Mikuni tmx
Posted:
Mon Sep 30, 2024 10:53 pmby Fast n Furious
Yes you need the spring.
Take a good look down the hole. The spring often gets stuck down there. May need a small screwdriver to persuade it out.
Re: Mikuni tmx
Posted:
Tue Oct 01, 2024 7:39 amby Jamjo
Thank you will put my glasses on later
