LCGB Forums

Posted: **Mon Jun 09, 2014 5:53 pm**

Hi

Can anyone tell me what the carb settings and needles/slide/atomiser should be for an SX200 standard engine with 42mm clubman exhaust.

Thanks for any help you can give

Steve

Posted: **Tue Jun 10, 2014 11:11 pm**

From Memory I ran on my SX200 and clubman a 25 mm dellorto...
This was run as open mouth carb....

98 main jet or to 101.
266 Atomizer 264 is an option.
45 Pilot
D22 Needle 2nd clip from top
40 slide

good luck G.

LCGB Forums

PHBH 25mm setup for sx200 with 42mm clubman

PHBH 25mm setup for sx200 with 42mm clubman

Re: PHBH 25mm setup for sx200 with 42mm clubman