Page 1 of 1
Mikuni TMX30
Posted:
Mon Aug 24, 2015 1:13 pmby molibdimum
The power jet pipe that runs from the float bowl to the bell mouth appears to have a blockage near the top.
I can feel something hard in there.....is this normal?
Don't wanna go digging around dislodging something that should be there.
Re: Mikuni TMX30
Posted:
Mon Aug 24, 2015 7:11 pmby rossclark
You sure it's not just a bulge in the tube that hold the pipe on?
Re: Mikuni TMX30
Posted:
Mon Aug 24, 2015 7:14 pmby rossclark
Re: Mikuni TMX30
Posted:
Tue Aug 25, 2015 9:24 pmby molibdimum
No its not a bulge its definitely something inside.
Feels like something plastic near the top.
Re: Mikuni TMX30
Posted:
Wed Aug 26, 2015 7:32 pmby rossclark
There's definitely nothing in the pipe on mine.
Pull it off and try poke something down the tube.
Re: Mikuni TMX30
Posted:
Wed Aug 26, 2015 9:36 pmby Warkton Tornado No.1
Why does this put me in mind of that film? What was it called?
It might have been 'Alien'
Re: Mikuni TMX30
Posted:
Thu Aug 27, 2015 8:43 amby molibdimum
Feck it Im gonna poke it out and see what it is.
Watch this space
Re: Mikuni TMX30
Posted:
Fri Aug 28, 2015 12:30 amby rossclark
Possibly a BB somebody put in to block off the pj...
Let us know!
Re: Mikuni TMX30
Posted:
Fri Aug 28, 2015 9:43 amby molibdimum
After looking at a mates carb last night it turns out what ever is in the pipe must be normal because his is the same.
I'm not going to poke it out now but I would like to know what it is.